10% de descuento

Opcom OP-Com 2014V 2010V Can OBD2 for Opel Firmware V1.59 with PIC18F458 chip Envío GratisSoportar Actualización de Firmware

En existencia. Historia 495 vendidos. Artículo NºSP105-B

Último precio: 20.00
¡Ordene hoy!: 18.00 10% de descuento
Envío gratuito Standard Flat Rate Shipping Service    Estimated delivery time: 7-18 working days.See details»
20cm*15cm*3cm     ( Inch: 7.87*5.91*1.18 )
Return for refund within 30 days,buyer pays return shipping. Read details»

Descripción del producto

OPCOM 2012diagnostic tool for Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. opcom 2012 lets you read and clear fault codes, support many control units.It can support up to 2014 car
software version: 2012
Opcom OP-Com 2012 V Can OBD2 for Opel Firmware V1.59
1. Software Version: 2012:Hardware Version: 1.59
2. OP-COM - PC based for Opel diagnostic
3. OP-COM is a PC based diagnostic program.
OPCOM 2012Function:
1. It covers almost all cars for Opel, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information
OPCOM 2012Feature:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Package List:
1. OP COM Interface
2. USB Cable
3. Software and Drivers CD

Forma de Contacto:
  Online service support

Ir a Facebook

Tel: +86-13983755604

What is the difference between Op-com V1.39 and V1.45
What is the difference between Op-com V1.39 and V1.45

Some heat discussions are given to Op-com OBD Opel scanner between the version V1.39 and V1.45. I have got the version V1.45 and my friend got the older version V1.39. 
We had made some comparison and drawn some conclusions list as below. 
For vehicle model:
Newly version Op-com adapter works great on new model about 2011. And V1.39 works better properly before year 2007. 
Firmware version 1.39 works steadily on a large number of models, all blocks are read. But V1.45 works well on some of the 
new models. For some models, like Astra H 2013, V1.39 is better
V1.45 is the newest version today. V1.39 and V1.45 mainly differs in firmware, the software should be 100219a. What is good is 
that V1.45 does not need to update the firmware. V1.45 works more CAN-ohm but V1.39 fits stable with K-Line.
How we figure out that V1.39 fits more K-Line and V1.45 works stable on CAN-BUS: 
First of all, we pick up a Op-com adapter, the relay clicks, switching to the appropriate CAN (eg, SWCAN), 
and the requested block is scanned. 
When finished with this unit, we choose another. And here begins the differences in the adapter with different V1.39 and 
V1.45 firmware. 
If we choose (randomly either V1.39 or V1.45) unit operates on the same CAN-e (eg SWCAN) that the adapter firmware 1.39 will simply continue to work, and the adapter firmware 1.45 will work not that better on the 
same CAN-e, still will produce inclusion (or rather re-enable) the same relay. 
Thus, with the firmware 1.45 for each access to the blocks occurs relay operation, and firmware 1.39 relay operates only when there 
is a change CAN-a.
Etiquetas: op-com